Silicone RTV Mold Rubber 28A 5 gallon kit tin cure

Take a fingerprint off of glass... Reproduce fine detail with Magikmold RTV 28; a high strength, pourable two component RTV silicone rubber which cures at room temperature. Because of its considerable fluidity (really flows!), it is recommended for the duplication of models of high detail and with many undercuts.

Special characteristics

* Easy to use - "bullet proof"
* Very good flow-ability and self de-airation
* Excellent tear strength - High resistance to laceration (this characteristic guarantees high resistance to wear and tear)
* High elongation and stretchability (420% elongation)
* High level of accuracy in reproducing very small particulars
* Outstanding chemical resistance to attack by polyurethane resins. Mold life is significantly extended.
* Always fresh!

TIN CURE for EASE OF USE - Easy to use and will cure against sulphur clay - First quality.

Room temperature cure. Shore hardness about "28A "

5 gallon pail kits weighs 43.65 pounds - 10:1 mix ratio

All of the following are commonly cast into this silicone:

* Urethane (polyurethane)
* Plaster
* Soap
* Wax
* Polyester casting resin
* Hydrocal, Hydrostone
* epoxy