Food, Soap and Candle Silicone RTV Mold Rubber 8A Platinum Cure 4lb kit

Easy to Use – It's the "Holy Grail" of Silicone Mold Making. Magikmold P008 is almost as thin as water or SAE 60 anyway. Mix equal amounts of A&B cure to a rubber mold that is perfect for your most delicate pieces. Make your fanciest, finest detail, hardest to mold parts with Magikmold P008. Translucent in color - CURES IN 2 HOURS at ROOM TEMPERATURE

photo from http://www.issm-iseb.org/b2b/waste_management/5/

Shore 8A hardness
280% Elongation

4.4 pound kits made of 2.2 pounds of "A" PLUS 2.2 pounds of "B"

Food, Soap and Candle Makers - This is your silicone! Soft enough for those delicate pieces and will take a fingerprint off of glass... Reproduce fine detail with Magikmold P008; easily pourable two component RTV silicone rubber which cures at room temperature.

Special characteristics

* Easy to use - "bullet proof"
THE BEST EVER flow-ability and self degas
High level of accuracy in reproducing very small particulars
Outstanding chemical resistance to attack by polyurethane resins. Always fresh!
PLATINUM CURE for ACCURACY would meet food grade guidelines but no certificate available

Room temperature cure. Shore hardness of "8A "

Half gallon kit weighs 4.4 pounds - 1:1 mix ratio

All of the following are commonly cast into this silicone:

Soap
Wax
Polyester Urethane (polyurethane)
casting resin
Hydrocal, Hydrostone
Epoxy
Plaster